CNC Radial Forging Machine GFM SX-40

CNC Radial Forging Machine GFM SX-40 

Manufacturer: GFM (Austria) 

New in 1977 

Numbers of Hammers: 4 

Forging force:   2.600 Ton (650t per hammer) 

Strokes per minute:  270 

Hammer length:  550 mm 

Maximum diameter of forging for structural steel: 

- circular cross section: Ø 450 mm 

- square cross section: 320 mm 

Maximum length of forging with/without lateral reception:  8.000 mm / 9.700 mm 

Feed of manipulator A: 7.200 mm 

Feed of manipulator B: 10.000 mm 

Manipulators speed in fast moving: 350 mm/s 

Feed speed of manipulators (steeples regulation): 10 ÷ 100 mm/s 

Cooling water pressure: 3 ÷ 5 bar 

Temperature of inlet water: max. 30˚C 

Cooling water consumption: 100 m3/h 

Pipe diameter for cooling water: 3” 

Compressed air: min. 5 bar 

Pipe diameter for compressed air: Ø20 mm  

Consumption of compressed air: 2 Nm3/h 

Power supply (nominal power): 

- low voltage site: 450 kW 

- high voltage site: 600 kW 

Machine dimension: 

Axis height of forging above the hall level: 750 mm 

Maximum height of machine above the hall level: 2.950 mm 

Maximum length of machine  at the hall level: 30.000 mm 

Foundation length: 44.000 mm 

Maximum width of machine at hall level without loading device: 8.020 mm 

Foundation width: 18.600 mm 

Machine weight: 439.220 kg 
 

TO SEE VIDEO KLICK THE LINK:  http://youtu.be/CzI9TDqC9Y8